B800/BT800 Straddle Stackers

2000 Pound Capacity Manual Stacker with Powered Lift ‹ › Presto B800 and BT800 Series are manual drive / powered lift stackers that are perfect for medium-duty pallet handling applications. They are available in 1,500 and 2,000 pound capacities at a 20" load center and with fixed or telescoping masts to provide lifting heights from 62" up 127" They feature fixed straddle bases for use with any type of pallet or skid - even closed bottom. B800 Series unit have  26" Straddle I.D. and BT800 Series units have a 32" Straddle I.D.

• Model Number	Load Capacity	Raised Height	Lowered Height	Dimensions H x W x L	Base/Legs I.D./O.D.		Wheel Dia. Front/Rear	Shipping Weight
  B800 Series - 20" Load Center
  B862-2000	2000 lbs	62"	2 ½"	80 x 32 x 54"	26" / 32"	5" / 4"		635 lbs
  B874-2000	2000 lbs	74"	2 ½"	92 x 32 x 54"	26" / 32"	5" / 4"		660 lbs
  BT800 Series - 20" Load Center
  BT894-2000	2000 lbs	94"	2 ½"	119/74 x 38 x 55"	32" / 38"	5" / 4"		880 lbs
  BT8107-2000	2000 lbs	107"	2 ½"	133/81 x 38 x 55"	32" / 38"	5" / 4"		930 lbs
  BT8127-2000	2000 lbs	127"	2 ½"	154/92 x 38 x 55"	32" / 38"	5" / 4"		980 lbs

  • WHEELS & CASTERS
  • REMOTE CONTROL
  • FIFTH WHEEL & TILLER
  • REVERSED / INVERTED FORKS
  • SLIP-ON PLATFORMS
  • MODIFIED PLATFORMS
  • EXTENDED BACKPLATE
  • BOOM WITH HOOK
  • RAM
  • DRUM GRABBER DG-30
  • ROLLER BED
  • P-6 DIE PULLER
  • FIRE RESISTANT HYDRAULIC FLUID
  • HEIGHT
  • AIR POWER

  • 

    WHEELS & CASTERS
    Standard wheels are phenolic plastic. Optional wheels are available. Consult Sales for details.

  • REMOTE CONTROLS
    Powered Lift Stackers have control mounted adjacent to the push handle. Optional Remote Controls are available. Choose Hand Operated (RC) with a 10' or 20' coil cord, or Foot Control (FC) with a 10' cord 

  • FIFTH WHEEL & TILLER
    Recommended for lifts with wide straddles of high load capacities. Consists of an 8" drive wheel and spring loaded tiller handle.

  • REVERSED / INVERTED FORKS
    Ideal for overhead installation. Forks can be modified in an inverted position which effectively increases the stackers lowered height and raised height. 

  • SLIP-ON PLATFORMS
    Platforms slide on over existing forks. 3 Sizes are available - 24" x 24" for 15" Load Centers, 32" x 30" for 18" and 20" Load Centers
    and 40" x 36" for 24" Load Centers
  • MODIFIED PLATFORMS
    Customized for a specific application, modified platforms include extended lengths or widths, cutouts, special shapes, floor level access, bridge plates, non-skid surfaces and more.
  • EXTENDED BACKPLATE
    Wider of higher backplates to accommodate special lifting requirements.
  • BOOM WITH HOOK
    Fork carriages can be equipped with a boom and hook for lifting and suspending loads with chains or lifting straps.

  • RAM
    A Cylindrical Ram mounted to the fork carriage for handling rolls, and coils. Rams up to 30" long available.

  • DRUM GRABBER DG-30
    Automatically grabs 30 or 55 gallon drums for hanling and stacking in the vertical position. Mounts on the back plate of any straddle base, fork model stacker. Parrot beak mechanism works with steel or fiber drums.
  • ROLLER BED
    Excellent for transferring heavy object to or from a stacker with minimum effort. 3" rollers can be oriented front-to-back or side-to-side. Maximum capacity is 1,000 lbs. Requires a 24" load center.
  • P-6 DIE PULLER
    Roller bed equipped with a hand operated winch with cable and hook. Maximum Capacity is 1,000 lbs. Requires a 24" Load Center
  • 

    FIRE RESISTANT HYDRAULIC FLUIDS
    Water and glycol fluids are fire resistant, non-explosive and non-toxic. Approved by Factory Mutual Insurance Engineering Laboratories.

  • HEIGHT
    Standard lift heights can be decreased to meet special requirements.
  • AIR POWER
    Air motor with hydraulic pump. I.5 GPM at 80 PSI and 80 CFM of free air with lift fully loaded. Includes a hand or foot control valve. (FRL not included).