AC Electric Stackers

These 1,000 lb. capacity stackers are powered by standard 115V single phase power and are highly reliable. They are available in portable or stationary configurations with fixed or telescoping masts and lifting heights up to 130". Standard units are equipped with 30" long adjustable solid steel forks. An optional 32" x 30" slip-on platform can be added. Custom designed platforms are also available. Lift and lowering control is via standard remote control with coil cord that extends a full 20 feet.

• Model Number	Load Capacity	Load Center	Raised Height	Low Height	Dimensions H x W x L	Base Legs I.D./O.D.	Wheel Dia. Front/Rear	Shipping Weight
  EPF Series - Portable - 30" Forks
  EPF752	1000 lbs	18"	52"	5 ¼"	66 x 31 x 49"	24" / 30"	5" / 4"	490 lbs
  EPF766	1000 lbs	18"	66"	5 ¼"	80 x 31 x 49"	24" / 30"	5" / 4"	500 lbs
  EPF778	1000 lbs	18"	78"	5 ¼"	92 x 31 x 49"	24" / 30"	5" / 4"	530 lbs
  ESF Series - Stationary - 30" Forks
  ESF750	1000 lbs	18"	50"	3 ¼"	64 x 30 x 49"	24" / 30"	N/A	480 lbs
  ESF764	1000 lbs	18"	64"	3 ¼"	78 x 30 x 49"	24" / 30"	N/A	570 lbs
  ESF776	1000 lbs	18"	76"	3 ¼"	90 x 30 x 49"	24" / 30"	N/A	590 lbs
  EPFT Series - Portable - 30" Forks
  EPFT796	1000 lbs	18"	94"	5 ¼"	112/67 x 41 x 52"	34" / 40"	5" / 5"	800 lbs
  EPFT7110	1000 lbs	18"	110"	5 ¼"	133/80 x 41 x 52"	34" / 40"	5" / 5"	900 lbs
  EPFT7130	1000 lbs	18"	130"	5 ¼"	155/92 x 40 x 52"	34" / 40"	5" / 5"	980 lbs

  OPTIONS & ACCESSORIES

  • WHEELS & CASTERS
  • REMOTE CONTROL
  • FIFTH WHEEL & TILLER
  • REVERSED / INVERTED FORKS
  • SLIP-ON PLATFORMS
  • MODIFIED PLATFORMS
  • EXTENDED BACKPLATE
  • BOOM WITH HOOK
  • RAM
  • DRUM GRABBER DG-30
  • ROLLER BED
  • P-6 DIE PULLER
  • FIRE RESISTANT HYDRAULIC FLUID
  • HEIGHT
  • AIR POWER

  • 

    WHEELS & CASTERS
    Standard wheels are phenolic plastic. Optional wheels are available. Consult Sales for details.

  • REMOTE CONTROLS
    Powered Lift Stackers have control mounted adjacent to the push handle. Optional Remote Controls are available. Choose Hand Operated (RC) with a 10' or 20' coil cord, or Foot Control (FC) with a 10' cord 

  • FIFTH WHEEL & TILLER
    Recommended for lifts with wide straddles of high load capacities. Consists of an 8" drive wheel and spring loaded tiller handle.

  • REVERSED / INVERTED FORKS
    Ideal for overhead installation. Forks can be modified in an inverted position which effectively increases the stackers lowered height and raised height. 

  • SLIP-ON PLATFORMS
    Platforms slide on over existing forks. 3 Sizes are available - 24" x 24" for 15" Load Centers, 32" x 30" for 18" and 20" Load Centers
    and 40" x 36" for 24" Load Centers
  • MODIFIED PLATFORMS
    Customized for a specific application, modified platforms include extended lengths or widths, cutouts, special shapes, floor level access, bridge plates, non-skid surfaces and more.
  • EXTENDED BACKPLATE
    Wider of higher backplates to accommodate special lifting requirements.
  • BOOM WITH HOOK
    Fork carriages can be equipped with a boom and hook for lifting and suspending loads with chains or lifting straps.

  • RAM
    A Cylindrical Ram mounted to the fork carriage for handling rolls, and coils. Rams up to 30" long available.

  • DRUM GRABBER DG-30
    Automatically grabs 30 or 55 gallon drums for hanling and stacking in the vertical position. Mounts on the back plate of any straddle base, fork model stacker. Parrot beak mechanism works with steel or fiber drums.
  • ROLLER BED
    Excellent for transferring heavy object to or from a stacker with minimum effort. 3" rollers can be oriented front-to-back or side-to-side. Maximum capacity is 1,000 lbs. Requires a 24" load center.
  • P-6 DIE PULLER
    Roller bed equipped with a hand operated winch with cable and hook. Maximum Capacity is 1,000 lbs. Requires a 24" Load Center
  • 

    FIRE RESISTANT HYDRAULIC FLUIDS
    Water and glycol fluids are fire resistant, non-explosive and non-toxic. Approved by Factory Mutual Insurance Engineering Laboratories.

  • HEIGHT
    Standard lift heights can be decreased to meet special requirements.
  • AIR POWER
    Air motor with hydraulic pump. I.5 GPM at 80 PSI and 80 CFM of free air with lift fully loaded. Includes a hand or foot control valve. (FRL not included).