B600 Series Battery Stackers

Always in Stock B600 Series Stacker Capacities up to 2,000 lbs. ‹ › Small and extremely maneuverable these stackers with powered lift are ideal for a wide variety of uses. They are available in 1,000 or 2,000 capacity at a 15" load center. Use them with small open bottom pallets or skids. Power is supplied by a heavy-duty 12 volt battery that generates a lifting speed of 5" per second. The leaf type chain has an 8,250 lb. yield point and a perforated metal screen to prevent physical contact during lifting and lowering. An LED dash mounted diagnostic display provides operators with battery status. A custom microprocessor charger is built-in for fast, convenient charging in any 115v outlet. Solid steel forks are adjustable from 6 1/2" to 26 1/2" O.D. Phenolic wheels won't damage floors and a foot operated floor lock prevents unwanted movement.

• Model Number	Load Capacity	Raised Height	Lowered Height	Dimensions H x W x L	Base/Legs I.D./O.D.		Wheel Dia. Front/Rear	Shipping Weight
  B600 Series - Adjustable 25" Forks (Non-Straddle) - 15" Load Center
  B652	1000 lbs	52"	5 ¼"	67 x 27 x 49"	15" / 21"	5" / 5"		500 lbs
  B666	1000 lbs	66"	5 ¼"	81 x 27 x 49"	15" / 21"	5" / 5"		520 lbs
  B678	1000 lbs	78"	5 ¼"	93 x 27 x 49"	15" / 21"	5" / 5"		540 lbs
  B652-2000	2000 lbs	52"	5 ¼"	67 x 27 x 49"	20" / 26"	5" / 5"		550 lbs
  B666-2000	2000 lbs	66"	5 ¼"	81 x 27 x 49"	20" / 26"	5" / 5"		570 lbs
  B678-2000	2000 lbs	78"	5 ¼"	93 x 27 x 49"	20" / 26"	5" / 5"		590 lbs

  OPTIONS & ACCESSORIES

  • WHEELS & CASTERS
  • REMOTE CONTROL
  • FIFTH WHEEL & TILLER
  • REVERSED / INVERTED FORKS
  • SLIP-ON PLATFORMS
  • MODIFIED PLATFORMS
  • EXTENDED BACKPLATE
  • BOOM WITH HOOK
  • RAM
  • DRUM GRABBER DG-30
  • ROLLER BED
  • P-6 DIE PULLER
  • FIRE RESISTANT HYDRAULIC FLUID
  • HEIGHT
  • AIR POWER

  • 

    WHEELS & CASTERS
    Standard wheels are phenolic plastic. Optional wheels are available. Consult Sales for details.

  • REMOTE CONTROLS
    Powered Lift Stackers have control mounted adjacent to the push handle. Optional Remote Controls are available. Choose Hand Operated (RC) with a 10' or 20' coil cord, or Foot Control (FC) with a 10' cord 

  • FIFTH WHEEL & TILLER
    Recommended for lifts with wide straddles of high load capacities. Consists of an 8" drive wheel and spring loaded tiller handle.

  • REVERSED / INVERTED FORKS
    Ideal for overhead installation. Forks can be modified in an inverted position which effectively increases the stackers lowered height and raised height. 

  • SLIP-ON PLATFORMS
    Platforms slide on over existing forks. 3 Sizes are available - 24" x 24" for 15" Load Centers, 32" x 30" for 18" and 20" Load Centers
    and 40" x 36" for 24" Load Centers
  • MODIFIED PLATFORMS
    Customized for a specific application, modified platforms include extended lengths or widths, cutouts, special shapes, floor level access, bridge plates, non-skid surfaces and more.
  • EXTENDED BACKPLATE
    Wider of higher backplates to accommodate special lifting requirements.
  • BOOM WITH HOOK
    Fork carriages can be equipped with a boom and hook for lifting and suspending loads with chains or lifting straps.

  • RAM
    A Cylindrical Ram mounted to the fork carriage for handling rolls, and coils. Rams up to 30" long available.

  • DRUM GRABBER DG-30
    Automatically grabs 30 or 55 gallon drums for hanling and stacking in the vertical position. Mounts on the back plate of any straddle base, fork model stacker. Parrot beak mechanism works with steel or fiber drums.
  • ROLLER BED
    Excellent for transferring heavy object to or from a stacker with minimum effort. 3" rollers can be oriented front-to-back or side-to-side. Maximum capacity is 1,000 lbs. Requires a 24" load center.
  • P-6 DIE PULLER
    Roller bed equipped with a hand operated winch with cable and hook. Maximum Capacity is 1,000 lbs. Requires a 24" Load Center
  • 

    FIRE RESISTANT HYDRAULIC FLUIDS
    Water and glycol fluids are fire resistant, non-explosive and non-toxic. Approved by Factory Mutual Insurance Engineering Laboratories.

  • HEIGHT
    Standard lift heights can be decreased to meet special requirements.
  • AIR POWER
    Air motor with hydraulic pump. I.5 GPM at 80 PSI and 80 CFM of free air with lift fully loaded. Includes a hand or foot control valve. (FRL not included).

WHEELS & CASTERS Standard wheels are phenolic plastic. Optional wheels are available. Consult Sales for details.
REMOTE CONTROLS Powered Lift Stackers have control mounted adjacent to the push handle. Optional Remote Controls are available. Choose Hand Operated (RC) with a 10' or 20' coil cord, or Foot Control (FC) with a 10' cord.
FIFTH WHEEL & TILLER Recommended for lifts with wide straddles of high load capacities. Consists of an 8" drive wheel and spring loaded tiller handle.
REVERSED / INVERTED FORKS Ideal for overhead installation. Forks can be inverted which effectively increases the stackers lowered height and raised height.
SLIP-ON PLATFORMS Platforms slide on over existing forks. 3 Sizes are available - 24" x 24" for 15" Load Centers, 32" x 30" for 18" and 20" Load Centers and 40" x 36" for 24" Load Centers.
MODIFIED PLATFORMS Customized for a specific application, modified platforms include extended lengths or widths, cutouts, special shapes, floor level access, bridge plates, non-skid surfaces and more.
EXTENDED BACKPLATE Wider of higher backplates to accommodate special lifting requirements.
BOOM WITH HOOK Fork carriages can be equipped with a boom and hook for lifting and suspending loads with chains or lifting straps.
RAM A Cylindrical Ram mounted to the fork carriage for handling rolls, and coils. Rams up to 30" long available.
DRUM GRABBER DG-30 Automatically grabs 30 or 55 gallon drums for hanling and stacking in the vertical position. Mounts on the back plate of any straddle base, fork model stacker. Parrot beak mechanism works with steel or fiber drums.
ROLLER BED Excellent for transferring heavy object to or from a stacker with minimum effort. 3" rollers can be oriented front-to-back or side-to-side. Maximum capacity is 1,000 lbs. Requires a 24" load center.
P-6 DIE PULLER Roller bed equipped with a hand operated winch with cable and hook. Maximum Capacity is 1,000 lbs. Requires a 24" Load Center.
FIRE RESISTANT HYDRAULIC FLUIDS Water and glycol fluids are fire resistant, non-explosive and non-toxic. Approved by Factory Mutual Insurance Engineering Laboratories.
HEIGHT Standard lift heights can be decreased to meet special requirements.
AIR POWER Air motor with hydraulic pump. I.5 GPM at 80 PSI and 80 CFM of free air with lift fully loaded. Includes a hand or foot control valve. (FRL not included).