WP/WPS Work Positioners

• 2" thick x 6-1/4" wide x 42" long fixed steel forks
• 14" fork I.D. & 26-1/2" fork O.D.
• 17" high fork carriage 
• Hand-operated floor lock
• Lifting speed- 4"/sec. 2000 lb - 2"/sec. 3000 lb.
• Heavy-duty 12V  battery with microprocessor charger
• Wheels: nylon front/polyurethane rear

Download Stacker Overview Brochure

Download General Catalog

Have a question or comment?

Please let us know your name.

Please let us know your email address.

Invalid Input

Invalid Input

Invalid Input

Question / Comment (*)Please let us know your message.

Enter Letters and Numbers(*)
RefreshInvalid Input

WP Fork Over Stacker WP Fork Over Stacker WPS Straddle Stacker WPS Straddle Stacker These low mast stackers are the ultimate multifunction devices. Use them to transport, to place loads on elevated surfaces or as portable lift tables. Choose non-straddle for use with open bottom pallet and skids or straddle style for use with any type of pallet or skid. An optional slip on platform is for use as a worksurface of use with non-palletized loads. Tiller handle steering provides excellent maneuverability.

• Model Number	Load Capacity	Load Center	Raised Height	Low Height	Dimensions H x W x L	Base Legs I.D./O.D.	Wheel Dia. Front/Rear	Shipping Weight
  WP Series - Non-Straddle
  WP36-20	2000 lbs	24"	36"	3 ¼"	60 x 28 x 65"	14" / 26 ½"	3" / 8"	850 lbs
  WP60-20	2000 lbs	24"	60"	3 ¼"	84 x 28 x 65"	14" / 26 ½"	3" / 8"	880 lbs
  WP36-30	3000 lbs	24"	36"	3 ¼"	60 x 28 x 65"	14" / 26 ½"	3" / 8"	870 lbs
  WP60-30	3000 lbs	24"	60"	3 ¼"	84 x 28 x 65"	14" / 26 ½"	3" / 8"	980 lbs
  For use with open bottom skids only. Not for use with closed bottom pallets.
  WPS42 Series - Straddle - 42" I.D.
  WPS4236-20	2000 lbs	24"	36"	2"	59 x 48 x 65"	42" / 48"	5" / 8"	880 lbs
  WPS4260-20	2000 lbs	24"	60"	2"	83 x 48 x 65"	42" / 48"	5" / 8"	920 lbs
  WPS4236-30	3000 lbs	24"	36"	2"	59 x 48 x 65"	42" / 48"	5" / 8"	900 lbs
  WPS4260-30	3000 lbs	24"	60"	2"	83 x 48 x 65"	42" / 48"	5" / 8"	970 lbs
  WPS50 Series - Straddle - 50" I.D.
  WPS5036-20	2000 lbs	24"	36"	2"	59 x 56 x 65"	50" / 56"	5" / 8"	890 lbs
  WPS5060-20	2000 lbs	24"	60"	2"	83 x 56 x 65"	50" / 56"	5" / 8"	970 lbs
  WPS5036-30	3000 lbs	24"	36"	2"	59 x 56 x 65"	50" / 56"	5" / 8"	920 lbs
  WPS5060-30	3000 lbs	24"	60"	2"	83 x 56 x 65"	50" / 56"	5" / 8"	990 lbs

  OPTIONS & ACCESSORIES

  • WHEELS & CASTERS
  • REMOTE CONTROL
  • FIFTH WHEEL & TILLER
  • REVERSED / INVERTED FORKS
  • SLIP-ON PLATFORMS
  • MODIFIED PLATFORMS
  • EXTENDED BACKPLATE
  • BOOM WITH HOOK
  • RAM
  • DRUM GRABBER DG-30
  • ROLLER BED
  • P-6 DIE PULLER
  • FIRE RESISTANT HYDRAULIC FLUID
  • HEIGHT
  • AIR POWER

  • 

    WHEELS & CASTERS
    Standard wheels are phenolic plastic. Optional wheels are available. Consult Sales for details.

  • REMOTE CONTROLS
    Powered Lift Stackers have control mounted adjacent to the push handle. Optional Remote Controls are available. Choose Hand Operated (RC) with a 10' or 20' coil cord, or Foot Control (FC) with a 10' cord 

  • FIFTH WHEEL & TILLER
    Recommended for lifts with wide straddles of high load capacities. Consists of an 8" drive wheel and spring loaded tiller handle.

  • REVERSED / INVERTED FORKS
    Ideal for overhead installation. Forks can be modified in an inverted position which effectively increases the stackers lowered height and raised height. 

  • SLIP-ON PLATFORMS
    Platforms slide on over existing forks. 3 Sizes are available - 24" x 24" for 15" Load Centers, 32" x 30" for 18" and 20" Load Centers
    and 40" x 36" for 24" Load Centers
  • MODIFIED PLATFORMS
    Customized for a specific application, modified platforms include extended lengths or widths, cutouts, special shapes, floor level access, bridge plates, non-skid surfaces and more.
  • EXTENDED BACKPLATE
    Wider of higher backplates to accommodate special lifting requirements.
  • BOOM WITH HOOK
    Fork carriages can be equipped with a boom and hook for lifting and suspending loads with chains or lifting straps.

  • RAM
    A Cylindrical Ram mounted to the fork carriage for handling rolls, and coils. Rams up to 30" long available.

  • DRUM GRABBER DG-30
    Automatically grabs 30 or 55 gallon drums for hanling and stacking in the vertical position. Mounts on the back plate of any straddle base, fork model stacker. Parrot beak mechanism works with steel or fiber drums.
  • ROLLER BED
    Excellent for transferring heavy object to or from a stacker with minimum effort. 3" rollers can be oriented front-to-back or side-to-side. Maximum capacity is 1,000 lbs. Requires a 24" load center.
  • P-6 DIE PULLER
    Roller bed equipped with a hand operated winch with cable and hook. Maximum Capacity is 1,000 lbs. Requires a 24" Load Center
  • 

    FIRE RESISTANT HYDRAULIC FLUIDS
    Water and glycol fluids are fire resistant, non-explosive and non-toxic. Approved by Factory Mutual Insurance Engineering Laboratories.

  • HEIGHT
    Standard lift heights can be decreased to meet special requirements.
  • AIR POWER
    Air motor with hydraulic pump. I.5 GPM at 80 PSI and 80 CFM of free air with lift fully loaded. Includes a hand or foot control valve. (FRL not included).

WHEELS & CASTERS Standard wheels are phenolic plastic. Optional wheels are available. Consult Sales for details.
REMOTE CONTROLS Powered Lift Stackers have control mounted adjacent to the push handle. Optional Remote Controls are available. Choose Hand Operated (RC) with a 10' or 20' coil cord, or Foot Control (FC) with a 10' cord.
FIFTH WHEEL & TILLER Recommended for lifts with wide straddles of high load capacities. Consists of an 8" drive wheel and spring loaded tiller handle.
REVERSED / INVERTED FORKS Ideal for overhead installation. Forks can be inverted which effectively increases the stackers lowered height and raised height.
SLIP-ON PLATFORMS Platforms slide on over existing forks. 3 Sizes are available - 24" x 24" for 15" Load Centers, 32" x 30" for 18" and 20" Load Centers and 40" x 36" for 24" Load Centers.
MODIFIED PLATFORMS Customized for a specific application, modified platforms include extended lengths or widths, cutouts, special shapes, floor level access, bridge plates, non-skid surfaces and more.
EXTENDED BACKPLATE Wider of higher backplates to accommodate special lifting requirements.
BOOM WITH HOOK Fork carriages can be equipped with a boom and hook for lifting and suspending loads with chains or lifting straps.
RAM A Cylindrical Ram mounted to the fork carriage for handling rolls, and coils. Rams up to 30" long available.
DRUM GRABBER DG-30 Automatically grabs 30 or 55 gallon drums for hanling and stacking in the vertical position. Mounts on the back plate of any straddle base, fork model stacker. Parrot beak mechanism works with steel or fiber drums.
ROLLER BED Excellent for transferring heavy object to or from a stacker with minimum effort. 3" rollers can be oriented front-to-back or side-to-side. Maximum capacity is 1,000 lbs. Requires a 24" load center.
P-6 DIE PULLER Roller bed equipped with a hand operated winch with cable and hook. Maximum Capacity is 1,000 lbs. Requires a 24" Load Center.
FIRE RESISTANT HYDRAULIC FLUIDS Water and glycol fluids are fire resistant, non-explosive and non-toxic. Approved by Factory Mutual Insurance Engineering Laboratories.
HEIGHT Standard lift heights can be decreased to meet special requirements.
AIR POWER Air motor with hydraulic pump. I.5 GPM at 80 PSI and 80 CFM of free air with lift fully loaded. Includes a hand or foot control valve. (FRL not included).