M800 Series Hand Operated Stackers

• 2,000 lb. capacity
• 50", 64", and 76" lift heights
• 1-1/2" thick x 3" wide adjustable solid steel forks
• Forks adjust from 6-1/2" to 26-1/2" O.D.
• 14" high fork backs
• Slip-on 32" x 30" platform available
• Hand-operated pump features variable control hand release lowering
• Lift rise approximately 1/2" per stroke
• Perforated metal screen
• Foot-operated floor lock
• Dual leaf-type chain with 8250 lb yield point
• High-impact, floor-saving phenolic wheels

Download Stacker Overview Brochure

Download General Catalog

Have a question or comment?

Please let us know your name.

Please let us know your email address.

Invalid Input

Invalid Input

Invalid Input

Question / Comment (*)Please let us know your message.

Enter Letters and Numbers(*)
RefreshInvalid Input

Hand Pump Stacker These hand operated stackers use a two-piston hand pump mechanism to provide effortless lifting of loads up to 2,000 lbs. They are equipped with adjustable solid steel forks (a slip-on platform is available). M800 Series Stackers have a lowered height of 3 1/4" and are available with lift heights of 50", 64" and 76".

• Model Number	Load Capacity	Load Center	Raised Height	Low Height	Dimensions H x W x L	Base Legs I.D./O.D.	Wheel Dia. Front/Rear	Shipping Weight
  M800 Series - Adjustable 30" Forks (Straddle)
  M852-2000	2000 lbs	18"	50"	3 ¼"	66 x 33 x 51"	26" / 32"	5" / 5"	460 lbs
  M866-2000	2000 lbs	18"	64"	3 ¼"	80 x 33 x 51"	26" / 32"	5" / 5"	480 lbs
  M878-2000	2000 lbs	18"	76"	3 ¼"	92 x 33 x 51"	26" / 32"	5" / 5"	500 lbs

  OPTIONS & ACCESSORIES

  • WHEELS & CASTERS
  • REVERSED / INVERTED FORKS
  • SLIP-ON PLATFORMS
  • MODIFIED PLATFORMS
  • EXTENDED BACKPLATE
  • BOOM WITH HOOK
  • RAM
  • DRUM GRABBER DG-30
  • ROLLER BED
  • P-6 DIE PULLER
  • FIRE RESISTANT HYDRAULIC FLUID
  • HEIGHT

  • 

    WHEELS & CASTERS
    Standard wheels are phenolic plastic. Optional wheels are available. Consult Sales for details.

  • REVERSED / INVERTED FORKS
    Ideal for overhead installation. Forks can be modified in an inverted position which effectively increases the stackers lowered height and raised height. 

  • SLIP-ON PLATFORMS
    Platforms slide on over existing forks. 3 Sizes are available - 24" x 24" for 15" Load Centers, 32" x 30" for 18" and 20" Load Centers
    and 40" x 36" for 24" Load Centers
  • MODIFIED PLATFORMS
    Customized for a specific application, modified platforms include extended lengths or widths, cutouts, special shapes, floor level access, bridge plates, non-skid surfaces and more.
  • EXTENDED BACKPLATE
    Wider of higher backplates to accommodate special lifting requirements.
  • BOOM WITH HOOK
    Fork carriages can be equipped with a boom and hook for lifting and suspending loads with chains or lifting straps.

  • RAM
    A Cylindrical Ram mounted to the fork carriage for handling rolls, and coils. Rams up to 30" long available.

  • DRUM GRABBER DG-30
    Automatically grabs 30 or 55 gallon drums for hanling and stacking in the vertical position. Mounts on the back plate of any straddle base, fork model stacker. Parrot beak mechanism works with steel or fiber drums.
  • ROLLER BED
    Excellent for transferring heavy object to or from a stacker with minimum effort. 3" rollers can be oriented front-to-back or side-to-side. Maximum capacity is 1,000 lbs. Requires a 24" load center.
  • P-6 DIE PULLER
    Roller bed equipped with a hand operated winch with cable and hook. Maximum Capacity is 1,000 lbs. Requires a 24" Load Center
  • 

    FIRE RESISTANT HYDRAULIC FLUIDS
    Water and glycol fluids are fire resistant, non-explosive and non-toxic. Approved by Factory Mutual Insurance Engineering Laboratories.

  • HEIGHT
    Standard lift heights can be decreased to meet special requirements.

WHEELS & CASTERS
Standard wheels are phenolic plastic. Optional wheels are available.
Consult Sales for details.

 

 

REVERSED / INVERTED FORKS
Ideal for overhead installation. Forks can be modified in an inverted position which effectively increases the stackers lowered height and raised height. 

 

SLIP-ON PLATFORMS
Platforms slide on over existing forks. 3 Sizes are available - 24" x 24" for 15" Load Centers, 32" x 30" for 18" and 20" Load Centers and 40" x 36" for 24" Load Centers

 

MODIFIED PLATFORMS
Customized for a specific application, modified platforms include extended lengths or widths, cutouts, special shapes, floor level access, bridge plates, non-skid surfaces and more.

 

 

EXTENDED BACKPLATE
Wider of higher backplates to accommodate special lifting requirements.

 

 

BOOM WITH HOOK
Fork carriages can be equipped with a boom and hook for lifting and suspending loads with chains or lifting straps.

 

RAM
A Cylindrical Ram mounted to the fork carriage for handling rolls, and coils. Rams up to 30" long available.

 

DRUM GRABBER DG-30
Automatically grabs 30 or 55 gallon drums for hanling and stacking in the vertical position. Mounts on the back plate of any straddle base, fork model stacker. Parrot beak mechanism works with steel or fiber drums.

 

ROLLER BED
Excellent for transferring heavy object to or from a stacker with minimum effort. 3" rollers can be oriented front-to-back or side-to-side. Maximum capacity is 1,000 lbs. Requires a 24" load center.

 

P-6 DIE PULLER
Roller bed equipped with a hand operated winch with cable and hook. Maximum Capacity is 1,000 lbs. Requires a 24" Load Center

FIRE RESISTANT HYDRAULIC FLUIDS
Water and glycol fluids are fire resistant, non-explosive and non-toxic. Approved by Factory Mutual Insurance Engineering Laboratories.

HEIGHT
Standard lift heights can be decreased to meet special requirements.