PS/PSA/PST/PSTA Series Straddle Pallet Stackers

• Fixed or adjustable straddle base
• Fixed or telescoping masts
• Adjustable 36" long x 1 1/2" thick solid steel forks
• Lift speed: 4"/sec. 1500 & 2000 lb. 2"/sec. 2700 lb.
• Hand-operated floor lock
• Heavy-duty 12V battery with microprocessor charger
• Fifth wheel for greater mobility
• Dual leaf-type chains with 8250 lb yield point
• Dual roller chain for 2700 lb lift
• Forks adjust from 6-1/2" to 30" O.D.
• Turning radius with 48" load: -106" aisle with 42" I.D. base -110" aisle with 50" I.D. base -112" aisle with adjustable base @ 50" I.D.

Download Stacker Overview Brochure

Download General Catalog

Have a question or comment?

Please let us know your name.

Please let us know your email address.

Invalid Input

Invalid Input

Invalid Input

Question / Comment (*)Please let us know your message.

Enter Letters and Numbers(*)
RefreshInvalid Input

PS Series Straddle Stacker PS Series Straddle Stacker PSTA Series Adjustable Straddle Stacker with Telescoping Mast PSTA Series Adjustable Straddle Stacker with Telescoping Mast Presto Pallet Stackers are ideal for servicing pallet racks. Choose from 41 models with capacities up to 2,700 lbs., lifting heights to 12 feet and a wide variety of available options. Available with fixed or adjustable straddle bases and fixed height or telescoping masts. Can be used with open bottom and closed bottom pallets. Fifth wheel configuration with tiller handle provides exceptional maneuverability and precise load positioning. All units feature 36" long adjustable solid steel forks - 1.5" thick x 3" wide on 2,000 lb. units and 1.5" thick by 4" wide on 2,700 lb. units.

• Model Number	Load Capacity	Load Center	Raised Height	Low Height	Dimensions H x W x L	Base Legs I.D./O.D.		Wheel Dia. Front/Rear	Shipping Weight
  PS Series - 42" I.D. Straddle
  PS262	2000 lbs	24"	62"	2 ½"	82 x 48 x 70"	42"/48"	5" / 4"		875 lbs
  PS274	2000 lbs	24"	74"	2 ½"	94 x 48 x 70"	42"/48"	5" / 4"		925 lbs
  PS2762	2700 lbs	24"	60"	2 ½"	84 x 48 x 70"	42"/48"	5" / 4"		1000 lbs
  PS2774	2700 lbs	24"	72"	2 ½"	96 x 48 x 70"	42"/48"	5" / 4"		1045 lbs
  PS50 Series - 50" I.D. Straddle
  PS262-50	2000 lbs	24"	62"	2 ½"	82 x 56 x 70"	50"/56"	5" / 4"		900 lbs
  PS274-50	2000 lbs	24"	74"	2 ½"	94 x 56 x 70"	50"/56"	5" / 4"		975 lbs
  PS2762-50	2700 lbs	24"	60"	2 ½"	84 x 56 x 70"	50" / 56"	5" / 4"		1025 lbs
  PS2774-50	2700 lbs	24"	72"	2 ½"	96 x 56 x 70"	50" / 56"	5" / 4"		1070 lbs
  PSA Series - Adjustable Base - Straddle (35" I.D. to 50" I.D.)
  PSA262	2000 lbs	24"	62"	2 ½"	82 x 41-56 x 72"	35-50"/41-56"	5" / 5"		1000 lbs
  PSA274	2000 lbs	24"	74"	2 ½"	94 x 41-56 x 72"	35-50"/41-56"	5" / 5"		1045 lbs
  PSA2762	2700 lbs	24"	60"	2 ½"	84 x 41-56 x 72"	35-50"/41-56"	5" / 5"		1145 lbs
  PSA2774	2700 lbs	24"	72"	2 ½"	96 x 41-56 x 72"	35-50"/41-56"	5" / 5"		1175 lbs
  PST Series - 42" I.D. Straddle - Telescoping Mast
  PST294	2000 lbs	24"	94"	2 ½"	119/73 x 48 x 71"	42-48"	5" / 4"		1000 lbs
  PST2107	2000 lbs	24"	107"	2 ½"	133/81 x 48 x 71"	42-48"	5" / 4"		1050 lbs
  PST2127	2000 lbs	24"	127"	2 ½"	155/93 x 48 x 71"	42-48"	5" / 4"		1100 lbs
  PST2144	2000 lbs	24"	144"	2 ½"	169/99 x 48 x 71"	42-48"	5" / 4"		1150 lbs
  PST2794	2000 lbs	24"	94"	2 ½"	119/75 x 48 x 71"	42-48"	5" / 4"		1190 lbs
  PST27107	2700 lbs	24"	107"	2 ½"	133/81 x 48 x 71"	42-48"	5" / 4"		1240 lbs
  PST27127	2700 lbs	24"	127"	2 ½"	156/94 x 48 x 71"	42-48"	5" / 4"		1290 lbs
  PST 50 Series - 50" I.D. Straddle - Telescoping Mast
  PST294-50	2000 lbs	24"	94"	2 ½"	119/72 x 56 x 71"	50-56"	5" / 4"		1010 lbs
  PST2107-50	2000 lbs	24"	107"	2 ½"	133/81 x 56 x 71"	50-56"	5" / 4"		1060 lbs
  PST2127-50	2000 lbs	24"	127"	2 ½"	155/93 x 56 x 71"	50-56"	5" / 4"		1110 lbs
  PST2144-50	2000 lbs	24"	144"	2 ½"	169/99 x 56 x 71"	50-56"	5" / 4"		1170 lbs
  PST2794-50	2700 lbs	24"	94"	2 ½"	119/75 x 56 x 71"	50-56"	5" / 4"		1200 lbs
  PST27107-50	2700 lbs	24"	107"	2 ½"	133/81 x 56 x 71"	50-56"	5" / 4"		1250 lbs
  PST27127-50	2700 lbs	24"	127"	2 ½"	156/94 x 56 x 71"	50-56"	5" / 4"		1300 lbs
  PSTA Series - Adjustable Base - Straddle (35" I.D. to 50" I.D.)
  PSTA294	2000 lbs	24"	94"	2 ½"	119/72 x 56 x 73"	35-50"/41-56"	5" / 5"		1150 lbs
  PSTA2107	2000 lbs	24"	107"	2 ½"	133/80 x 56 x 73"	35-50"/41-56"	5" / 5"		1200 lbs
  PSTA2127	2000 lbs	24"	127"	2 ½"	154/92 x 56 x 73"	35-50"/41-56"	5" / 5"		1250 lbs
  PSTA2794	2700 lbs	24"	94"	2 ½"	120/75 x 56 x 73"	35-50"/41-56"	5" / 5"		1400 lbs
  PSTA27107	2700 lbs	24"	107"	2 ½"	133/81 x 56 x 73"	35-50"/41-56"	5" / 5"		1450 lbs
  PSTA27127	2700 lbs	24"	127"	2 ½"	155/93 x 56 x 73"	35-50"/41-56"	5" / 5"		1500 lbs

  OPTIONS & ACCESSORIES

  • WHEELS & CASTERS
  • REMOTE CONTROL
  • FIFTH WHEEL & TILLER
  • REVERSED / INVERTED FORKS
  • SLIP-ON PLATFORMS
  • MODIFIED PLATFORMS
  • EXTENDED BACKPLATE
  • BOOM WITH HOOK
  • RAM
  • DRUM GRABBER DG-30
  • ROLLER BED
  • P-6 DIE PULLER
  • FIRE RESISTANT HYDRAULIC FLUID
  • HEIGHT
  • AIR POWER

  • 

    WHEELS & CASTERS
    Standard wheels are phenolic plastic. Optional wheels are available. Consult Sales for details.

  • REMOTE CONTROLS
    Powered Lift Stackers have control mounted adjacent to the push handle. Optional Remote Controls are available. Choose Hand Operated (RC) with a 10' or 20' coil cord, or Foot Control (FC) with a 10' cord 

  • FIFTH WHEEL & TILLER
    Recommended for lifts with wide straddles of high load capacities. Consists of an 8" drive wheel and spring loaded tiller handle.

  • REVERSED / INVERTED FORKS
    Ideal for overhead installation. Forks can be modified in an inverted position which effectively increases the stackers lowered height and raised height. 

  • SLIP-ON PLATFORMS
    Platforms slide on over existing forks. 3 Sizes are available - 24" x 24" for 15" Load Centers, 32" x 30" for 18" and 20" Load Centers
    and 40" x 36" for 24" Load Centers
  • MODIFIED PLATFORMS
    Customized for a specific application, modified platforms include extended lengths or widths, cutouts, special shapes, floor level access, bridge plates, non-skid surfaces and more.
  • EXTENDED BACKPLATE
    Wider of higher backplates to accommodate special lifting requirements.
  • BOOM WITH HOOK
    Fork carriages can be equipped with a boom and hook for lifting and suspending loads with chains or lifting straps.

  • RAM
    A Cylindrical Ram mounted to the fork carriage for handling rolls, and coils. Rams up to 30" long available.

  • DRUM GRABBER DG-30
    Automatically grabs 30 or 55 gallon drums for hanling and stacking in the vertical position. Mounts on the back plate of any straddle base, fork model stacker. Parrot beak mechanism works with steel or fiber drums.
  • ROLLER BED
    Excellent for transferring heavy object to or from a stacker with minimum effort. 3" rollers can be oriented front-to-back or side-to-side. Maximum capacity is 1,000 lbs. Requires a 24" load center.
  • P-6 DIE PULLER
    Roller bed equipped with a hand operated winch with cable and hook. Maximum Capacity is 1,000 lbs. Requires a 24" Load Center
  • 

    FIRE RESISTANT HYDRAULIC FLUIDS
    Water and glycol fluids are fire resistant, non-explosive and non-toxic. Approved by Factory Mutual Insurance Engineering Laboratories.

  • HEIGHT
    Standard lift heights can be decreased to meet special requirements.
  • AIR POWER
    Air motor with hydraulic pump. I.5 GPM at 80 PSI and 80 CFM of free air with lift fully loaded. Includes a hand or foot control valve. (FRL not included).

WHEELS & CASTERS Standard wheels are phenolic plastic. Optional wheels are available. Consult Sales for details.
REMOTE CONTROLS Powered Lift Stackers have control mounted adjacent to the push handle. Optional Remote Controls are available. Choose Hand Operated (RC) with a 10' or 20' coil cord, or Foot Control (FC) with a 10' cord.
FIFTH WHEEL & TILLER Recommended for lifts with wide straddles of high load capacities. Consists of an 8" drive wheel and spring loaded tiller handle.
REVERSED / INVERTED FORKS Ideal for overhead installation. Forks can be inverted which effectively increases the stackers lowered height and raised height.
SLIP-ON PLATFORMS Platforms slide on over existing forks. 3 Sizes are available - 24" x 24" for 15" Load Centers, 32" x 30" for 18" and 20" Load Centers and 40" x 36" for 24" Load Centers.
MODIFIED PLATFORMS Customized for a specific application, modified platforms include extended lengths or widths, cutouts, special shapes, floor level access, bridge plates, non-skid surfaces and more.
EXTENDED BACKPLATE Wider of higher backplates to accommodate special lifting requirements.
BOOM WITH HOOK Fork carriages can be equipped with a boom and hook for lifting and suspending loads with chains or lifting straps.
RAM A Cylindrical Ram mounted to the fork carriage for handling rolls, and coils. Rams up to 30" long available.
DRUM GRABBER DG-30 Automatically grabs 30 or 55 gallon drums for hanling and stacking in the vertical position. Mounts on the back plate of any straddle base, fork model stacker. Parrot beak mechanism works with steel or fiber drums.
ROLLER BED Excellent for transferring heavy object to or from a stacker with minimum effort. 3" rollers can be oriented front-to-back or side-to-side. Maximum capacity is 1,000 lbs. Requires a 24" load center.
P-6 DIE PULLER Roller bed equipped with a hand operated winch with cable and hook. Maximum Capacity is 1,000 lbs. Requires a 24" Load Center.
FIRE RESISTANT HYDRAULIC FLUIDS Water and glycol fluids are fire resistant, non-explosive and non-toxic. Approved by Factory Mutual Insurance Engineering Laboratories.
HEIGHT Standard lift heights can be decreased to meet special requirements.
AIR POWER Air motor with hydraulic pump. I.5 GPM at 80 PSI and 80 CFM of free air with lift fully loaded. Includes a hand or foot control valve. (FRL not included).